판매가 | 330000 |
---|---|
할인판매가 | 330,000원 (330,000원 할인) |
할인금액 | 총 할인금액 원 (모바일할인금액 원) |
적립금 | |
제휴적립금 | |
배송방법 | 택배 |
배송비 | 4,000원 (100,000원 이상 구매 시 무료) |
상품 추가설명 번역정보 |
구매방법 | |
---|---|
배송주기 |
배송 | |
---|---|
수량 |
|
상품 정보 | 가격 | 삭제 |
---|
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
구매하기
슈미드 독일 본사에서 직접 공수한 슈미드 골드마우스피스입니다.
국내에서 유일한 딜러로써 슈미드 마우스피스를 보유하고있습니다.
슈미드 마우스피스 사이즈는 8.5호 9호 11호 입니다.
구입하시기전에 (주)장미악기 사무실에 꼭 문의해주세요.
Original Engelbert Schmid Mouthpieces
There a four widths to meet the individual lip sizes. For each rim width there are five cups,- shallow, medium shallow, medium, medium deep and deep, in order to achieve a brighter or darker sound, an easier high register or a more voluminous low register. Usually Engelbert Schmid mouthpieces are used with the original bore. For individual needs sometimes it´s an advantage to drill out the bore for one or two tenths of a millimeter. In this case the curve of the cup has to be adjusted.
Model-No. | cup depth | cup | rim diameter insice | rim diameter outside | rim width | bore | Var. |
No. 1 | medium shallow | funnel shaped | 17,5 or 18 | 25,5 or 26 | 4 | 4,2 | only digital |
No. 1.5 | medium | funnel shaped | 17,5 or 18 | 25,5 or 26 | 4 | 4,4 | only digital |
No. 2 | medium deep | funnel shaped | 17,5 or 18 | 25,5 or 26 | 4 | 4,7 | only digital |
No. 2.5 | deep | funnel shaped | 17,5 or 18 | 25,5 or 26 | 4 | 5 | only digital |
No. 3 | extra deep | funnel shaped | 17,5 or 18 | 25,5 or 26 | 4 | 5,4 | only digital |
No. 4 | shallow | slightly cup-shaped | 17 | 25 | 4 | 3,6 | digital or traditional |
No. 4.5 | medium shallow | slightly cup-shaped | 17 | 25 | 4 | 3,8 | digital or traditional |
No. 5 | medium | slightly cup-shaped | 17 | 25 | 4 | 4 | digital or traditional |
No. 5.5 | medium deep | slightly cup-shaped | 17 | 25 | 4 | 4,2 | digital or traditional |
No. 6 | deep | slightly cup-shaped | 17 | 25 | 4 | 4,4 | digital or traditional |
No. 7 | shallow | slightly cup-shaped | 17,5 | 25,5 | 4 | 3,7 | digital or traditional |
No. 7.5 | medium shallow | slightly cup-shaped | 17,5 | 25,5 | 4 | 3,9 | digital or traditional |
No. 8 | medium | slightly cup-shaped | 17,5 | 25,5 | 4 | 4,1 | digital or traditional |
No. 8.5 | medium deep | slightly cup-shaped | 17,5 | 25,5 | 4 | 4,3 | digital or traditional |
No. 9 | deep | slightly cup-shaped | 17,5 | 25,5 | 4 | 4,5 | digital or traditional |
No. 10 | shallow | slightly cup-shaped | 18 | 26 | 4 | 3,8 | digital or traditional |
No. 10.5 | medium shallow | slightly cup-shaped | 18 | 26 | 4 | 4 | digital or traditional |
No. 11 | medium | slightly cup-shaped | 18 | 26 | 4 | 4,2 | digital or traditional |
No. 11.5 | medium deep | slightly cup-shaped | 18 | 26 | 4 | 4,4 | digital or traditional |
No. 12 | deep | slightly cup-shaped | 18 | 26 | 4 | 4,6 | digital or traditional |
No. 13 | shallow | slightly cup-shaped | 18,5 | 26,5 | 4 | 3,9 | only traditional |
No. 13.5 | medium shallow | slightly cup-shaped | 18,5 | 26,5 | 4 | 4,1 | only traditional |
No. 14 | medium | slightly cup-shaped | 18,5 | 26,5 | 4 | 4,3 | only traditional |
No. 14.5 | medium deep | slightly cup-shaped | 18,5 | 26,5 | 4 | 4,5 | only traditional |
No. 15 | deep | slightly cup-shaped | 18,5 | 26,5 | 4 | 4,7 | only traditional |
To choose your mouthpiece follow these steps:
1. Decide about your rim width.
2. Listen to your sound with the medium cup, i.e. with No. 2, No. 5, No. 8, No. 11 or No. 14. If you wish a brighter sound try the next shallower cup, or if you wish a darker sound , try the next deeper cup.
Usually Engelbert Schmid mouthpieces are used with the original bore. For individual needs sometimes its an advantage to drill out the bore for one or two tenths of a millimeter. In this case the curve of the cup has to be adjusted again.
A new development in Engelbert Schmid mouthpieces
The traditional mouthpiece production is done by copying a hand made example with tools that have to be repeatedly sharpened.
Although the sample may be very good, it is not possible to get a perfect copy of the curvature by hand. There will also be a certain tolerance due to the necessity of repeatedly sharpening the tools.
The Original or Model Engelbert Schmid mouthpieces that exist since 1981 are made with utmost care from samples that were made by hand by Engelbert Schmid himself. This very successful series of mouthpieces will be continued, with only two minor improvements:
1. The shaft is now a uniform taper between Morse and metric so that they fit in just about any mouthpipe.
2. Exact geometric research show the necessity of increasing the bore by 2/10 mm at each step from shallow, through semi shallow, middle, semi deep and deep.
Otherwise the mouthpieces Nr. 4 through 15 remain the same.
The future in producing the acoustically important pieces of a horn from the mouthpiece to the bell is in introducing the use of electronics. Engelbert Schmid has (in cooperation with his daughter Susanne Schmid) determined the ideal curvature for the mouthpieces 4 to 12. In addition the long planned mouthpieces Nr. 1 - 3 in the Viennese type are now ready. These funnel shaped mouthpieces are available from half shallow to extra deep. Viennese mouthpieces are generally very deep. For example the Nr. 1.5 (middle for Viennese standards) is comparable to Nr. 9 (deep) of the German standards. For a fourth horn player outside of Vienna the Nr. 2 (semi deep, Viennese standard) will be deep enough. The funnel mouthpieces can be beneficial for horn players who tend to have too bright of a sound. The bore of the funnel mouthpieces are, in general, larger which can cause more noise in the sound with certain lips.
The ideal curvatures have been digitalized and the mouthpieces will be produced with wear free tools so that the mouthpieces will stay the same for all time. By the way normal digital copying lathes also copy all the small imperfections in the sample and add their own. The digital production of ES mouthpieces has nothing to do with existing digital copying lathes! The exact geometric measurement of the mouthpieces Nr. 4 to 12, that exist since 1981, has lead to minor changes in the digital versions:
1. The rim is now perfectly comfortable, as Engelbert Schmid had always imagined it.
2. The mouthpieces now have a uniform cup wall thickness of 1,7 mm, which has a positive influence on the way the mouthpieces vibrates. You now see from the outside the shape of the cup.
3. The steps in the bore from shallow to deep have to increase 2/10mm. The traditional mouthpieces will also have this change.
4. The steps in the cup depth have been evenly divided. Shallow, semi shallow, and deep are approximately the same as the traditional cup depth. Middle and semi deep were a bit deeper than logical.
That means the digital mouthpieces middle and semi deep are a bit shallower than before. You may have to go one half step deeper than before to get the sound you prefer.
The advantage of the digital mouthpieces lies in the increased efficiency and the ability to make perfect copies.